L-01
Polyester Lamination
Top layer · Clear protective film
Thermally bonded clear film permanently seals the print below. Creates a waterproof, UV-stable outer shell that repels salt, spray, and abrasion.
WaterproofUV StableAbrasion Resistant
Premium Marine Protection
Custom Covers for Every Fender on the Water
Every brand. Every size. Every model. FenderSox™ are precision-cut neoprene covers built from a proprietary dieline for your exact fender — Taylor Made, Polyform, Big Bumper, Majoni, Mission Sentry, AERE, or any other inflatable yacht fender on the market. If it's a fender, we make a cover for it.
Why Custom-Fit Fender Covers Outperform Universal Sleeves
The Problem with Universal Covers
Most boat fender covers on the market are universal-fit — a one-size-fits-several sleeve that relies on drawstrings or Velcro closures to stay in place. The result is a baggy, bunched cover that shifts at the dock, traps moisture between the sleeve and fender, and looks like an afterthought on a premium vessel.
Worse, the failure points are the drawstrings and Velcro themselves — they wear out, snag on dock lines, and leave your fender exposed at the worst moment.
The FenderSox™ Difference
Every FenderSox™ cover starts from a proprietary dieline — a precision flat pattern engineered for your exact fender brand and model. Whether you own a Polyform F-5, a Taylor Made Hull Gard, or an inflatable superyacht fender, we cut your cover to those exact dimensions.
Installed by deflating the fender and sliding the cover on before re-inflation, the neoprene stretches to a molded, seamless fit. No drawstrings. No Velcro. Nothing to fail. The result is a set of personalized boat fender covers that look like they came with the boat.
Every Brand. Every Size. Every Model.
Our dieline library covers every fender brand on the market — and if a model isn't already in the library, we cut a new dieline for it at no extra cost. Select your brand below, or submit any fender brand, model, or dimensions and we'll fit it.
Taylor Made
→Custom-fit covers for all five Taylor Made models — Super Gard, Hull Gard, Storm Gard, Tuff End, and Big B. Precision dielines for every size in the lineup.
Polyform
→The most complete Polyform cover library available — F-Series, G-Series, A-Series, HTM, LD, and NF. Covers for all 38 Polyform US models.
Big Bumper Company
→Custom neoprene covers for every Big Bumper inflatable fender — 2 ft through 12 ft. The most innovative inflatable fender on the market, fully personalized.
Majoni Fenders
→Precision-fit covers for the full Majoni Star range — Italian-made inflatable fenders popular on European cruisers and sailing yachts.
Mission Sentry Fenders
→Custom covers for Mission Sentry commercial-grade inflatable fenders — built for tugs, workboats, and heavy-duty marine applications.
AERE Inflatable Fenders
→Bespoke covers for AERE inflatable fenders — the premium Italian fenders favored on megayachts and large motor cruisers.
Inflatable Yacht Fenders — Other Brands
→If your fender isn't from one of the brands above, it doesn't matter — we cover every inflatable yacht and superyacht fender on the market, regardless of brand, size, or model. Send us the dimensions (or the brand and model) and we'll cut a dieline to fit.
If it's a fender, we make a cover for it. Submit any brand, model, or dimensions — we'll confirm fit, or create a new dieline at no extra cost.
// sys.material_analysis · v4.2 · flexifabrics.com
FenderSox™
Layer Technology
5mm Neoprene · Cross-Section Breakdown
Active Display
3-Layer Construction
3-Year Warranty
L-02
Dye Sublimation Print
Middle layer · Sealed beneath lamination
Your design is infused into the polyester fibre before lamination — not on top of it. Colours are locked in permanently at a molecular level: zero fading, cracking, or peeling.
Fade-ProofMolecularly SealedNo Cracking / Peeling
L-03
5mm Neoprene Core
Base layer · Marine-grade closed-cell foam
The same closed-cell neoprene used in professional wetsuits. Absorbs dock and hull impact while maintaining an inherent moisture barrier — even at the core.
Marine Grade5mm ThickImpact Absorbing
M-01 · Impact
5mm
Impact Protection
Closed-cell neoprene cushions every impact between your hull and dock.
M-02 · Print
∞
Print Permanence
Sublimation beneath lamination means your graphic never fades, peels, or cracks.
M-03 · Water
IP67
Water Resistance
Laminated polyester shell repels salt water, spray, and UV — season after season.
5mm Neoprene — Why the Material Matters
UV Resistant
Closed-cell neoprene doesn't degrade under constant sun exposure. Colors stay vivid and material stays supple season after season.
Saltwater Proof
Unlike fabric sleeves that absorb salt and breed mildew, neoprene is inherently water-resistant and dries rapidly.
Impact Absorbent
5mm of neoprene cushions dock impacts, protecting both the hull and the fender from premature wear.
Custom Design: Your Boat Name, Logo, or Brand
Beyond a precision fit, FenderSox™ can be fully customized with your boat name, yacht logo, marina brand, or custom artwork. Our design team creates a digital mockup for your approval before a single piece of neoprene is cut.
01
Submit Your Request
Tell us your fender brand, model, and your design vision. Upload logos, colors, or inspiration.
02
Approve Your Mockups
We create a full digital mockup. Unlimited revisions until it's perfect — no payment yet.
03
Pay and We Manufacture
Once you approve, pay securely online. Your covers ship within 3 weeks.
04
3-Year Warranty
Every FenderSox™ is backed by a 3-year warranty against material and manufacturing defects.